Expert Answers about Ford F-350 Cab and Chassis
- Do I Need Safety Chains for My Andersen Ultimate Hitch in California
- According to California Towing Code #29003: Every hitch, drawbar, coupler or other connection between motor vehicles towing must be securely attached to the vehicle and be strong enough to handle the weight of whatever you are towing.
So, you will need safety chains like the # RM3230 which are designed for use with your Andersen Ultimate 5th Wheel hitch # AM3200
view full answer... - Brake Controller Location in 2021 Ford F-350
- The brake controller plug is located behind the coin tray that's just to the left of the HVAC controls on your 2021 Ford Super Duty. I've shown the location with some photos, and you can also see the location in the linked installation video.
If you don't already have a brake controller in mind, I'd recommend the Tow Pro Liberty by Redarc, part # RED24FR. The main unit installs under the dash so it's out of the way. You'd adjust the brakes using the remote-mounted control knob that can...
view full answer... - How To Wire the Reverse Solenoid On the Titan 20K Hydraulic Brake Actuator
- The Titan Hydraulic Brake Actuator part # T4854120 has two black wires that are used for the reverse lockout solenoid, one goes to the reverse light circuit on the trailer connector and the other to a ground. It does not matter which black wire gets run to either of these places.
If you have a 7-way trailer connector on the trailer then there is already a port present for the reverse light circuit. If you only have a 4-way trailer connector then you will need to replace this and use an...
view full answer... - How To Put a 7-Way Plug In The Bed And On The Back Of A 2023 Ford F-350 Cab And Chassis
- I can definitely help and get you set up. If your truck does not have any factory trailer wiring we will basically have to do this from the ground up.
First you will install a 4 pin connector part # C58044. This will simply splice in using the included quick splice connectors.
Next you will need to install the universal 7 way install kit # ETBC7. This kit includes all of the components you will need to upgrade the existing 4 pin connector to a 7 way. You will also have everything needed...
view full answer... - Installing Maintenance Battery Charger for 2016 Ford F-350 with Dual Batteries
- The CTEK MULTI US 7002 12-Volt Universal Battery Charger w/ Pulse Maintenance and Backup Power # CTEK56353 will work well for your 2016 Ford F-350 cab and chassis. You simply will want to make sure the one set of alligator clips is the correct location.
I've attached a photo to assist. If your batteries are wired in series you will connect the positive clip to one battery and the negative to the other. If they are factory installed, then they are in parallel and you will only need...
view full answer... - Tekonsha Trailer Brake Controller Installation in 2016 Ford F-350 Cab and Chassis
- Brake controller wiring adapter # 3034-P is the correct one to use to install a Tekonsha/Draw-Tite aftermarket trailer brake controller like the P3 # 90195 in your 2016 Ford F-350 cab and chassis. This adapter has a black connector on one end that plugs in to the controller itself and the other end has a grey connector that plugs in to the port under behind the dash panel for the factory unit. You can see this process in the linked video at the 4:35 mark.
view full answer...
Go To Results